Feel the difference at the gap.
A thin, flexible seal helps reduce drafts through suitable gaps around doors and windows.
Self-Adhesive Weather Stripping – Wind-Proof, Insulates & Easy to Apply
{% t "store.catalogue.description" %}
Close the gaps.
Keep your home feeling cozy.
Door shut, but still feeling a draft? Add a flexible barrier where unwanted air gets in—with a simple peel-and-stick seal.
Choose my pack ↑Keep everyday annoyances outside.
Cold drafts, dust and small insects can find their way through open gaps. Help close their entry points.
Find the gaps around your home.
Use on suitable door and window edges. Check the surface and clearance so doors and windows can still open and close normally.
A simple DIY upgrade.
Measure & cut → Clean & dry → Peel → Press. No drilling or screws; scissors help you trim the strip.
Flexible protection. A discreet finish.
The translucent sealing edge helps bridge a gap, while the adhesive section secures the strip to the surface.
Get the fit right before you buy.
Each roll is 0.98 in wide × 39.4 in long (2.5 cm × 1 m). Measure the full length you want to seal.
Small details. Everyday comfort.
A low-profile addition for the edges you use every day. Choose the amount you need, then trim each strip to fit.
Choose enough for your project.
2 rolls = 2 m · 5 rolls = 5 m · 8 rolls = 8 m. Add up your measured edges before selecting a pack.
The details, at a glance.
Total strip width2.5 cm / 0.98 in
Length per roll1 m / 39.4 in
Pack options2, 5 or 8 rolls
Total width includes the adhesive section and sealing flap; it is not the maximum gap size. Pack length is supplied as individual 1 m rolls.
A few things worth knowing.
How many rolls do I need?
Measure each edge you want to seal and add the lengths together. Each roll is 1 m (39.4 in) long. Choose 2, 5 or 8 rolls based on your measurements, allowing for trimming. A full door or window frame may need several rolls.
Where should I apply it?
Apply the adhesive section to a suitable clean, dry surface, with the flexible flap overlapping the gap. Check fit first and make sure the strip does not obstruct hinges, locks, drainage openings or normal opening and closing.
What do I need for installation?
A measuring tape, scissors and a cleaning cloth are useful. Measure and cut, clean and fully dry the surface, remove the adhesive liner, then align and press firmly. No drilling or screws are required.
Will it stick to every surface?
Surface condition affects adhesion. Dust, grease, moisture, loose paint and rough textures can reduce grip. Check a small discreet area for compatibility before applying the full strip.
Can I still open my doors and windows?
Position the strip on one surface so the flexible edge overlaps the gap without sticking moving parts together. Test movement after fitting and adjust if the strip catches or makes closing difficult.
What is included in my pack?
Your selected pack contains 2, 5 or 8 rolls of self-adhesive weather stripping. Each roll is 2.5 cm wide and 1 m long. Installation tools are not included.